ZDRAVÍM
chci se zeptat, jak to bývá se středícími kroužky na ty rozměry co maj nissany - s13ka ma mit tusim 66.1mm je tak? - akorát bbych potřeboval z velikosti disku 67.1 nebo 68mm na tech 66.1 - jenze na netu se koukám to je vsechno na objednavku?? :/ nemate nekdo pristup k takovym vecem ? potreboval bych to do patku mit tady jeste... :/
diky moc
Petr
středící kroužky - SPECHA (67.1 a 68 na 66.1
středící kroužky - SPECHA (67.1 a 68 na 66.1
My project site:
http://www.raziel-project.tk
http://www.youtube.com/watch?v=wGj_myRgsWk 0-100km/h
The Driver don't pick the car...The car'll pick the Driver
That's a mystical bond between Man and Machine
My ride: Walbro 255l/h, Garrett T25G A/R. 80 & A/R .64, HKS Adjustable Actuator @ 1 bar, Front Mount Intercooler, Braided Oil Hose, BRaided Water Hoses, HD Stage 2 Chip, FreeFlow Exhaust with TypeX BackBox, KN air filter, Apex - Forge Recirculation Blow-Off Valve, NGK BCPR7ES, New OEM Nissan Lambda, Head after Rebuild - (Ported, Brand New OEM Nissan Valves ('51' Intake) 'n exhaust Valves 'n valve stem oil seals), OEM Nissan Head Gasket, OEM Nissan Exhaust Gaskets, Apex Electric Fan, [Gauges: Water Temp, Oil Temp, Oil Pressure, Boost, Volts], Adjustable Tension Rods with UniBall, Brand new OEM Wishbones, s14 VLSD, Sparco belts, silicon hoses... and tons of refurbishing, polishing and repainting in engine bay and many other bits...
http://www.raziel-project.tk
http://www.youtube.com/watch?v=wGj_myRgsWk 0-100km/h
The Driver don't pick the car...The car'll pick the Driver
That's a mystical bond between Man and Machine
My ride: Walbro 255l/h, Garrett T25G A/R. 80 & A/R .64, HKS Adjustable Actuator @ 1 bar, Front Mount Intercooler, Braided Oil Hose, BRaided Water Hoses, HD Stage 2 Chip, FreeFlow Exhaust with TypeX BackBox, KN air filter, Apex - Forge Recirculation Blow-Off Valve, NGK BCPR7ES, New OEM Nissan Lambda, Head after Rebuild - (Ported, Brand New OEM Nissan Valves ('51' Intake) 'n exhaust Valves 'n valve stem oil seals), OEM Nissan Head Gasket, OEM Nissan Exhaust Gaskets, Apex Electric Fan, [Gauges: Water Temp, Oil Temp, Oil Pressure, Boost, Volts], Adjustable Tension Rods with UniBall, Brand new OEM Wishbones, s14 VLSD, Sparco belts, silicon hoses... and tons of refurbishing, polishing and repainting in engine bay and many other bits...
Re: středící kroužky - SPECHA (67.1 a 68 na 66.1
Jedině by ti je někdo stočil na soustruhu. Kroužky o stěně 1 nebo dokonce 0,5 mm nikdo neprodává.
Re: středící kroužky - SPECHA (67.1 a 68 na 66.1
jedine je udelat stocit stavajici na tak slabou stenu nejdou
CNC výpalky laser ,plasma a autogen
Re: středící kroužky - SPECHA (67.1 a 68 na 66.1
Takhle tenky se delaj plastovy. Myslim, ze zrovna 67.1/66.1 jsem dostal k tem kopiim Advan RGII.
Tady v MB by je mohli mit v prodejne kol na Laurinove ulici.
Ale nevim jestli bych se tam stihnul stavit v otviraci obe.
Tady v MB by je mohli mit v prodejne kol na Laurinove ulici.
Ale nevim jestli bych se tam stihnul stavit v otviraci obe.
It is better to live dangerously for 34 years than to be bored for 84 years. (Adelaide Siffert)
On the 7th day GOD created the RWD car just for fun!!
(O)=(O)/ 200SX . \(O)=(O)
Nippon Sangyo 200SX RS133
On the 7th day GOD created the RWD car just for fun!!
(O)=(O)/ 200SX . \(O)=(O)
Nippon Sangyo 200SX RS133
Re: středící kroužky - SPECHA (67.1 a 68 na 66.1
Zdravím ,
mám uplně stejnej problém , jak to dopadlo ?Díky
mám uplně stejnej problém , jak to dopadlo ?Díky